pushbx wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== New 95LX setup Script for lDebug ======

Today I updated the lCDebug executable on the HP 95LX. I also changed the ''95lx.sld'' file. Some flags moved around for the disassembler, and the default length of the D and U commands can now be modified. I chose to set a default length of 12 "lines". (The "lines" count does not always correspond exactly to lines displayed.)

===== =====

This is the file:

<code>r dco or= 800
r dco6 or= 9200
r dco2 or= 111
r ior = #16
r ioc = #40
r dao dao clr 2 or 380
r dco3 and= ~ 4000_0000
r defaultulines = #12
r defaultdlines = #12</code>

Changes from prior revision:

  * Set DAO 300 (40-column mode, no indent)
  * Clear DAO 2 (no blank after comma)
  * Set DEFAULTULINES and DEFAULTDLINES


Other than that I also tried out running lCDebug with its serial I/O option on the 95LX, making use of the new IRQ sharing support. This worked well. Here's the script file ''ser.sld'' to set up lDebug on COM1:

<code>r dspvi 0C
r dspvm 2#1_0000
r dspvp 3F8
r dco or= 4000</code>

{{tag>ldebug 95lx}}


~~DISCUSSION~~

pushbx wiki

User Tools

Site Tools

Page Tools